Stovax F40 Bedienungsanleitung

F40 AvantiConventional Flue Coal Effect StoveInstructions for Use,Installation and ServicingFor use in GB, IE (Great Britain and Eire)IMPORTANTDo not

1.1 The chimney or flue system must comply with the rules inforce, and must be a minimum of 127mm in diameter. (5").1.2 The minimum effective hei

ENSURE THAT THE APPLIANCE IS CORRECTLYADJUSTED FOR THE GAS TYPE AND CATEGORYAPPLICABLE IN THE COUNTRY OF USE. REFER TO THEDATABADGE AND TECHNICAL SPEC

2.6 Remove the four black screws in the firebox and lift thefirebox clear. See diagram 5.2.7 For Midi and Highline versions of the F40, it will bene

IF THERE IS STILL NO DEFINITE FLOW, THE FLUE MAYREQUIRE ATTENTION - SEEK EXPERT ADVICE.2.15 The flue system may now be connected to the stove, ensure

4.2 Close the door by pushing the lower right corner of thedoor until a click is heard. The door will now have latched.Opening is done by the lower ri

This appliance must be serviced at least once a year by acompetent person.All tests must be serviced by best practice as described by thecurrent CORGI

16SERVICING INSTRUCTIONSFAULT FINDING CHARTSPILOT WILL NOT STAY LIT OR FIRE GOES OUT IN USEEnsure there is no debris around the pilot assembly, (e.g.

1.1 All principle components can be replaced without removingthe appliance from its installation, although it is essentialthat the gas supply to the

3.3 Remove the lint arrestor by folding the tabs back. Seediagram 6.3.4 Undo the compression nut on the pilot unit, disconnect theignition lead from

7.1 Follow steps 2.1 to 2.5 to remove the burner unit. Makingsure the gas supply is isolated at the isolation point. Turn theburner unit over to acce

2CONTENTSCOVERING THE FOLLOWING MODELS8685MCSC - P8685MCSC8685MMCSC - P8685MMCSC8685HMCSC - P8685HMCSCPAGEAPPLIANCE COMMISIONING CHECKLIST 3USER INSTR

10.1 Open and remove the front door. Remove the glass frame.Carefully remove the ceramic components and place to oneside. Undo the two screws at the

13. SPARE PARTS LIST21SERVICING INSTRUCTIONSREPLACING PARTSComponent NG LPGPROPANE BUTANEBURNER UNIT B0215 PB0215MAIN INJECTOR IN0053 IN0052PILOT ASSE

22SERVICE RECORDS1ST SERVICEDate of Service:...Next Service Due:...

23

Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JGTel: (01392) 261999 Fax: (01392) 444148 E-mail: [email protected]

3APPLIANCE COMMISSIONING CHECKLISTFLUE CHECK PASS FAIL1. Flue is correct for appliance2. Flue flow test 3. Spillage test GAS CHECK1. Gas soundness &am

1.1 Installation and servicing must be carried out by acompetent person in accordance with Gas Safety(Installation and Use) Regulations 1998, the re

IF THE FIRE IS EXTINGUISHED OR GOES OUT IN USE,WAIT 3 MINUTES BEFORE ATTEMPTING TO RELIGHTTHE FIRE. THE CONTROL VALVE HAS AN INTERLOCKDEVICE AND THERE

2.10 To turn the F40 Avanti off (Touch Pad)2.10.1Press the ON / OFF button (A) once and the F40 Avanti willturn off. See diagram 4.ENSURE THE APPLIANC

4.1 Place the flame baffle onto the burner and push against therear tray lip. See diagram 64.2 Locate the rear panel against the spacer brackets and

6.1 This is a safety feature incorporated in all GAZCO fires,which automatically switches off the gas supply if the pilotlight goes out and fails to h

9INSTALLATION INSTRUCTIONSTECHNICAL SPECIFICATIONCOVERING THE FOLLOWING MODELS8685MCSC - P8685MCSC8685MMCSC - P8685MMCSC8685HMCSC - P8685HMCSCMODEL GA